____________________________________________________ Voodoo Banshee Windows® NT 4.0 Driver Kit by IceMan! ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ Voodoo Banshee Driver Kit: 1.05.00 Voodoo Banshee DirectX® Driver Version: 4.00.1381.0344 Glide™ 2.X Driver: 2.61.00.0674 Glide 3.X Driver: 3.10.00.0674 OpenGL® Driver Version: 1.0.0.0761 ICD Voodoo Banshee Control Panel: 4.11.01.0442 * This Driver Kit was compiled and modified by IceMan! * ======================================================================= Disclaimer! ======================================================================= * THESE DRIVERS ARE NOT SUPPORTED BY 3DFX OR X3DFX! * USE THEM AT YOUR OWN RISK!!! * I CANNOT BE HELD RESPONSIBLE FOR ANY EFFECTS THEY MAY HAVE ON YOUR COMPUTER! * NOTE: This Driver Kit contains files being made by 3dfx. I did NOT make, edit or modify any of these files, except for the INF file. I simply made this Kit available for people who wish to have the most complete, BEST-OF-ALL and UP-TO-DATE fully functional and installable drivers. Whether you want to use them or not, is totally up to you. ======================================================================= What's New: ======================================================================= Version 1.05.00: - OpenGL/Glide updated to the latest versions!! - Added Optimize.reg for optimal performance (double click the file)! * Also don't forget to execute OpenGL.reg file!! ======================================================================= What's in the distribution? ======================================================================= This distribution contains Voodoo Banshee display drivers and control panel for Windows NT 4.0 or higher. ======================================================================= Installation ======================================================================= Requirements ------------ - Windows NT 4.0 or higher - PC with a Pentium II, Pentium Pro, Pentium or similar processor - 16MB of RAM or more Suggested Fresh Installation / Upgrade Existing Drivers --------------------------------------------- NOTE: For Fresh Installations, complete Steps 1 - 9 before removing your existing 2D card. If existing Voodoo Banshee drivers are being updated, installation is complete once step 9 is done. 1) Extract the files for the Voodoo Banshee driver to a directory. 2) Log-in to Windows NT as Administrator. 3) Click Start, Contol Panel. Double-click on Display. 4) Click the settings tab then click "Change" 6) Click "Have Disk" and enter the path to the extracted drivers. 7) When asked to choose a device, select "Voodoo Banshee" 8) You may then be prompted to insert the Windows NT Voodoo Banshee Driver Disk. Enter the path to the drivers again. 9) Windows NT will copy the drivers. Steps 10-13 are only used during a fresh installation 10) Power off the system and remove your existing 2D card. 11) Install the Voodoo Banshee Card in a free PCI/AGP Slot 12) Power on the system and verify that video appears during post 13) Start Windows NT. If problems occur, revert to "Last Known Good" from within the Windows NT startup options. * Also don't forget to execute OpenGL.reg file!! If Problems are Encountered whilst Trying to Run Quake3 ------------------------------------------------------- Follow these simple instructions to rectify the problem: 1) Copy the file 3dfxOGL.dll from C:\Windows\System. 2) Paste this file into the directory containing the Quake3 executable. 3) Rename this file to 3dfxvgl.dll * Also don't forget to execute OpenGL.reg file!!