/---------------------------------------------------------------------------/ WCPUL2.EXE Version 1.6 for Win32 /---------------------------------------------------------------------------/ First ^^^^^ This program is the device driver who has rewritten L2 cache Latency of Intel Pentium II, Pentium III, Pentium II Xeon, Celeron w/L2, to an optional value at the time of the OS starting. This program is the soft for a power user. Please pay attention because there be the possibility that OS stops triggering and introduce readily. Also, pay attention in the case that I exchange the CPU. It may not act normally, with the value of Latency that was setting up it until now, when it becomes the CPU that differs. Do the driver Uninstall, whether or not the Latency value is set up to an ineffective value (FFh recommendation) once. Target operating system ^^^^^^^^^^^^^^^^^^^^^^^ It runs on Windows 95/98 and Windows NT 4.0/5.0 in both Japanese and English mode. As for the driver for DOS, obtain special WCPUL2D. Automatic installation ^^^^^^^^^^^^^^^^^^^^^^ Run InstDD.EXE, This program does the preparation of the copy of the drivers file and make registry automatically. After re-starting the system, run WCPUL2.EXE and setup/check L2 Latency. ************************************************************ English version ... The remainder is during translation now. See the documents of Japanese. ************************************************************ Update History ^^^^^^^^^^^^^^ Ver.1.4 '99/02/12[FRI] Added. support DualProcessor (provision). Ver.1.5 '99/03/28[SUN] Added. resetert func. Ver.1.6 '99/04/25[SUN] Added. check CPUID. Support ^^^^^^^ Official HomePage : http://www.h-oda.com/ Internet e-mail : support@h-oda.com It is while I offer WCPUID latest version and various kinds information in Official HomePage. /---------------------------------------------------------------------------/ Copyright (c) 1998-99 By H.Oda! All Rights Reserved. /---------------------------------------------------------------------------/