Voodoo Series Windows(r) 2000 Driver Kit ----------------------------------------- Copyright ( 1999-2000 3dfx Interactive, Inc. ) All Rights Reserved NOTE: Use of this software is subject to the terms in the 3dfx license agreement. 3dfx Interactive, Inc. Website: http://www.3dfx.com This product may be covered by one or more of the following US patents: 5,724,561 5,740,343 5,808,621 5,822,452 5,831,624 ======================================================================= What's in the distribution? ======================================================================= This distribution contains Voodoo Series display drivers and 3dfx Tools for Windows 2000. ======================================================================= Installation ======================================================================= Requirements ------------ - Windows 2000 or higher - PC with a Pentium II, Pentium Pro, Pentium or similar processor - 16MB of RAM or more Suggested NOTE ------------ The Voodoo Series drivers MUST be installed first before 3dfx Tools can be installed. Driver Installation --------------------------------------------- 1) Open Control Panel; then open the System applet. 2) Click the "Hardware" tab, then click "Device Manager". 3) Expand "Display Adapters", right click on "Voodoo3" or "Voodoo Series..." then click "Properties". 4) Click the "Driver" tab then click "Update Driver". 5) When the Upgrade Device Driver Wizard initially appears, click "Next". 6) In the Upgrade Device Driver Wizard, select the "Display a list..." option then click "Next". 7) Click "Have Disk" then enter the path to where you extracted the driver files. Click "Next". 8) When asked to choose a device, select "Voodoo Series Driver" Click "Next". 9) Windows 2000 will copy the drivers. 10) When prompted, restart your computer. 3dfx Tools Installation --------------------------------------------- 1) Open the folder where you extracted this driver update to. 2) Double-click on the "Setup" program icon. 3) When the Install Wizard "Welcome" screen appears, click "Next". 4) Click "Yes" if you have read and agree to the terms in the "Software Licence Agreement". 5) When prompted, restart your computer.